Hardware

    8 kHz circuit-level monitoring, live on Day 1

    Gain real-time visibility into power usage down to the circuit level to prevent downtime, manage capacity, and optimize loads with precision in high-performance data centers.

    Verdigris EV2 Power Meter hardware unit

    Designed for rapid deployment at scale

    EV2 power meters are engineered for fast deployment with minimal shutdown time, making large-scale monitoring rollouts practical and affordable.

    High Current CT interface module for EV2 power meter installation
    • Energy data gateway mounts directly to the panel, with no external conduit or enclosure required
    • Verdigris Smart CTs clamp on and daisy-chain together for safe, clean wiring and efficient debugging
    • Open loop design reduces mechanical stress and weight on breakers

    At T-Mobile, 1,400+ panels have been deployed across the fleet. Each gateway installs in roughly two hours, about 83% faster than legacy metering, with zero downtime to the served circuits.

    Scalable installation

    Built for enterprise scale, install and setup in hours (vs. weeks or months)

    Highly-granular data

    Detailed data down to the circuit level, sampled at 8 kHz

    All your data in one place

    No more siloed data, no more remote access issues

    We selected Verdigris as a modern alternative to legacy electrical metering systems with a focus on data and analytics. Within a few weeks we were able to get actionable visibility into cooling infrastructure performance.

    Innovation Manager at T-Mobile

    The data foundation for the Verdigris platform

    EV2 captures 8,000 samples per second per circuit, continuously, on every monitored panel. Every load class, from a GPU training rack to an HVAC chiller, has a distinct electrical fingerprint. EV2 resolves all of them at the same fidelity.

    Every load class has a unique electrical fingerprint. EV2 resolves each one at 8,000 samples per second, per circuit. A revenue meter averaging at 1 Hz compresses all four of these signatures into the same number.

    This density is what makes real measurement possible. Standard revenue metering compresses the same signal to a single reading per second: adequate for billing, insufficient for the analysis that sits downstream of it. What EV2 captures is what the validated layer validates against physics — and what Signals and your orchestration then act on.

    EV2 feeds the validated layer (the substrate Verdigris owns): Verdigris validates the 8 kHz signal against physics and exposes validated operating limits that Signals and your orchestration consume.

    Also available: Verdigris EV2 Pro adds forensic waveform capture for mission-critical environments requiring raw power quality data.

    Specifications

    Analog Inputs

    14 three-phase or 42 single-phase electrical circuits, 4 voltage measurement channels (100-480 Vac)

    Panel Types Supported

    Works with a range of electricity switchgears, switchboards, distribution panels, MCCs, and breaker boxes.

    Frequency

    50-60 Hz

    Current Measurement Range

    0.25 A - 15,000 A

    Connectivity

    LTE, WiFi, or Ethernet

    Storage

    Unlimited storage for continuous recording (minutely granularity)

    Warranty

    One year standard, extended options available

    Measurements

    • Energy (Wh)
    • Voltage (V)
    • Current (A)
    • Active Power (W)
    • Apparent Power (VA)
    • Reactive Power (VAr)
    • Power Factor
    • Steady State Voltage Waveform
    • Steady State Current Waveform
    • Total Harmonic Distortion
    • Local Temperature

    What Day 1 enables

    High-fidelity electrical data powers these capabilities:

    Protect your critical infrastructure today

    See how 8 kHz monitoring delivers the visibility you need to prevent failures before they impact operations. Available across Verdigris Cloud, Forge, and Sentinel SKUs; pricing varies by deployment size and configuration.